Cable Testers

Features of the Pro 3 audio cable tester:
There are 2 rows of 4 LED's corresponding to each of the possible connector pins and one for the screen (or ground) connection. As each pin is activated, the LED's indicate all connections associated with that pin, so that short, open and crossed circuits can be easily found. The LED's also show the possibility of high resistance or leakage connections.

Memory option:
There are 3 LED's indicating the state of the MEMORY option.
If the MEMORY LED is on, then AudioJoG Pro automatically scans all the connections and compares against information held with just one press of the test button.
MEMORY works in both test modes.

Test modes:
DOUBLE ENDED - both ends of the cable under test are plugged into Pro 3.
SINGLE ENDED - one end of the cable under test is plugged into the Pro 3 the other into another AudioJoG Pro 8 or the 19" rack mount AudioJoG Rack 8.

Specification Double {Single} Ended:
Continuity and Short Circuits, less than 255K {75K} ohms
Open Circuits (end to end and between connected pins), greater than 255K {75K} ohms.
Less than 2 {5} second test time
L 197mm W 110mm D 50mm
Uses 9v PP3 battery (not supplied) Continuity and Short Circuits, less than 255K {75K} ohms

Download Pro 3 Manual Download Pro 3 Flyer

ALL new AudioJog audio cable tester with SINGLE & DOUBLE ended testing.

Connectors:
3 Pin XLR Male and Female
1/4" stereo or mono
Single or Twin Bantam, stereo or mono
1/8" stereo or mono
4 Pole Speakon
DIN 3 & 5 Pole
RCA
BNC

Features of the AudioJog Pro audio cable tester:
There are 2 rows of 6 LED's corresponding to each of the possible connector pins and one for the screen (or ground) connection. As each pin is activated, the LED's indicate all connections associated with that pin, so that short, open and crossed circuits can be easily found. The LED's also show the possibility of high resistance or leakage connections.

Memory option:
There are 3 LED's indicating the state of the MEMORY option.
If the MEMORY LED is on, then AudioJoG Pro automatically scans all the connections
and compares against information held with just one press of the test button.
MEMORY works in both test modes.

Test modes:
DOUBLE ENDED - both ends of the cable under test are plugged into AudioJoG Pro.
SINGLE ENDED - one end of the cable under test is plugged into AudioJoG Pro theother into another AudioJoG Pro or the 19" rack mount AudioJoG Rack.

Download AudioJog Pro Manual Download AudioJog Pro Flyer

ALL new AudioJog Pro 8 cable tester with SINGLE & DOUBLE ended testing.

This is also a LAN cable tester and an Ethernet cable tester

Connectors for the AudioJog Pro 8 – Cat 5e Network Cable Testers
3, 4 & 5 Pin XLR Male & Female
1/4" stereo or mono
Single or Twin 4.4mm Bantam, stereo or mono
1/8" stereo or mono
2, 4 & 8 Pole Speakon
DIN 3, 5 & 8 Pole
MINI DIN 4 Pole (S Video)
RCA
BNC
RJ45, Ethercon
USB A & B
Red & Black "banana"

Features of the AudioJog Pro 8 Cat 5e cable tester:
There are 2 rows of 9 LED's corresponding to each of the possible connector pins of the AudioJog Pro 8 – Cat 5e Network Cable Testers and one for the screen (or ground) connection. As each pin is activated, the LED's indicate all connections associated with that pin, so that short, open and crossed circuits can be easily found. The LED's also show the possibility of high resistance or leakage connections. 2 LED's indicate a good digital network connection, either Straight through, or Crossed over.

Memory option
There are 4 LED's indicating the state of the MEMORY option.
If the MEMORY LED is on, then AudioJoG Pro 8 automatically scans all the connections and compares against information held with just one press of the test button.
MEMORY works in both test modes.

Test modes for AudioJog Pro 8 Cat 5e Cable Testers:
Double ended - both ends of the cable under test are plugged into AudioJoG Pro 8.
Single ended - one end of the network cable under test is plugged into AudioJoG Pro 8 the other into another AudioJoG Pro 8.

Specification Double {Single} Ended:
Continuity and Short Circuits, less than 255K {75K} ohms
Open Circuits (end to end and between connected pins), greater than 255K {75K} ohms.
Less than 2 {5} second test time
L 203mm W 150mm D 50mm
Uses 9v PP3 battery (not supplied) Continuity and Short Circuits, less than 255K {75K} ohms.

Download AudioJog Pro 8 Manual Download AudioJog Pro 8 Flyer

Sensational NEW Rack 8 19 inch 2U rack mount Audio/Lighting/Network cable tester with SINGLE & DOUBLE ended testing.

Red & Black "banana"
3, 4 & 5 Pin XLR Male & Female
1/4" stereo or mono
Single or Twin Bantam, stereo or mono
1/8" stereo or mono
2,4 & 8 Pole Speakon
DIN 3, 5 & 8 Pole
MINI DIN 4 Pole (S Video)
RCA
BNC
RJ45, Ethercon
USB A & B

Features of the AudioJog Rack 8:
There are 2 rows of 9 LED's corresponding to each of the possible connector pins and one for the screen (or ground) connection. As each pin is activated, the LED's indicate all connections associated with that pin, so that short, open and crossed circuits can be easily found. The LED's also show the possibility of high resistance or leakage connections. 2 LED's indicate a good digital network connection, either Straight through, or Crossed over.

Memory option:
There are 6 LED's indicating the state of the MEMORY option.
If the MEMORY LED is on, then AudioJoG Rack 8 automatically scans all the connections and compares against information held with just one press of the test button.
MEMORY works in both test modes.

Test modes:
DOUBLE ENDED - both ends of the cable under test are plugged into AudioJoG Rack 8.
SINGLE ENDED - one end of the cable under test is plugged into AudioJoG Rack 8 the other into another AudioJoG Rack 8 or the small hand held AudioJoG Pro.

Specification Double {Single} Ended:
Continuity and Short Circuits, less than 255K {75K} ohms
Open Circuits (end to end and between connected pins), greater than 255K {75K} ohms.
Less than 2 {5} second test time
L 75mm W 483mm (19") D 88mm (2U)
Requires 9V dc Power supply (supplied)