Search:

Products

Audio Jog Pro 8 - Cable Tester

Audio Jog Pro 8 Audio Cable Tester


ALL new AudioJog Pro 8 cable tester with SINGLE & DOUBLE ended testing.

This is also a LAN cable tester and an Ethernet cable tester

Connectors for the AudioJog Pro 8 – Cat 5e Network Cable Testers
 3, 4 & 5 Pin XLR Male & Female
 1/4" stereo or mono
 Single or Twin 4.4mm Bantam, stereo or mono
 1/8" stereo or mono
 2, 4 & 8 Pole Speakon
 DIN 3, 5 & 8 Pole
 MINI DIN 4 Pole (S Video)
 RCA
 BNC
 RJ45, Ethercon
 USB A & B
 Red & Black "banana"

Features of the AudioJog Pro 8 Cat 5e cable tester:
There are 2 rows of 9 LED's corresponding to each of the possible connector pins of the AudioJog Pro 8 – Cat 5e Network Cable Testers and one for the screen (or ground) connection. As each pin is activated, the LED's indicate all connections associated with that pin, so that short, open and crossed circuits can be easily found. The LED's also show the possibility of high resistance or leakage connections. 2 LED's indicate a good digital network connection, either Straight through, or Crossed over.

Memory option
 There are 4 LED's indicating the state of the MEMORY option.
 If the MEMORY LED is on, then AudioJoG Pro 8 automatically scans all the connections and compares against information held with just one press of the test button.
 MEMORY works in both test modes.

Test modes for AudioJog Pro 8 Cat 5e Cable Testers:
 Double ended - both ends of the cable under test are plugged into AudioJoG Pro 8.
 Single ended - one end of the network cable under test is plugged into AudioJoG Pro 8 the other into another AudioJoG Pro 8.

Specification Double {Single} Ended:
 Continuity and Short Circuits, less than 255K {75K} ohms
 Open Circuits (end to end and between connected pins), greater than 255K {75K} ohms.
 Less than 2 {5} second test time
 L 203mm W 150mm D 50mm
 Uses 9v PP3 battery (not supplied) Continuity and Short Circuits, less than 255K {75K} ohms.

 

Download AudioJog Pro 8 Manual 


CBI Email Updates
Have Questions?

Our Brands: