Pro 3 Cable Tester

Pro 3 Audio Cable Tester

ALL new Pro 3 audio cable tester with SINGLE & DOUBLE ended testing.

 3 Pin XLR Male and Female
 1/4" stereo or mono

Features of the Pro 3 audio cable tester:
There are 2 rows of 4 LED's corresponding to each of the possible connector pins and one for the screen (or ground) connection. As each pin is activated, the LED's indicate all connections associated with that pin, so that short, open and crossed circuits can be easily found. The LED's also show the possibility of high resistance or leakage connections.

Memory option:
There are 3 LED's indicating the state of the MEMORY option.
 If the MEMORY LED is on, then AudioJoG Pro automatically scans all the connections and compares against information held with just one press of the test button.
 MEMORY works in both test modes.

Test modes:
 DOUBLE ENDED - both ends of the cable under test are plugged into Pro 3.
 SINGLE ENDED - one end of the cable under test is plugged into the Pro 3 the other into another AudioJoG Pro 8 or the 19" rack mount AudioJoG Rack 8.

Specification Double {Single} Ended:
 Continuity and Short Circuits, less than 255K {75K} ohms
 Open Circuits (end to end and between connected pins), greater than 255K {75K} ohms.
 Less than 2 {5} second test time
 L 197mm W 110mm D 50mm
 Uses 9v PP3 battery (not supplied) Continuity and Short Circuits, less than 255K {75K} ohms


Download Pro 3 Manual 

CBI Email Updates
Have Questions?

Our Brands: